ITEL A23 FRP Unlock Using Infinity CM2 Dongle
1.First Download ITEL A23 Tested Flash File From Here
2.Add Downloaded Pac, Flash File In CM2 Dongle.
3. Go To service Tab Under Service Tab Click On Format FS/ Reset Phone/ Clear FRP
Card found: S/N : D8&&&& , v0135
Chinese Miracle II [SPD module] v 1.22Loading : A23-SU335-8.1-IN-V010-20181017.pac
CRVersion : BP_R1.0.0
PacCPUinfo : sp9832e_1h10
PacVersion : A23-SU335-8.1-IN-V010-20181017
FastCheck : 0x0060AA2CD7Loading files …
File : fdl1-sign.bin
File : fdl2-sign.bin
File : sharkle_pubcp_customer_Smart_Phone_nvitem.bin
File : prodnv.img
File : u-boot-spl-16k-sign.bin
File : SC9600_sharkle_pubcp_customer_Smart_Phone_modem.dat
File : SharkLE_LTEA_DSP_evs_on.bin
File : SHARKLE2_DM_DSP.bin
File : sharkle_cm4.bin
File : PM_sharkle_cm4.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo.bmp
File : logo.bmp
File : cache.img
File : u-boot-sign.bin
File : persist.img
File : sharkle_pubcp_customer_Smart_Phone_deltanv.bin
File : sml-sign.bin
File : vendor.img
File : tos-sign.bin
File : gnssbdmodem.bin
File : gnssmodem.bin
File : vbmeta-sign.img
File : sp9832e_1h10.xml
Load Ok!
Operation : Format File System / Reset Settings [ v1.22 ]
Settings : SmartFormat is On
Remove battery. Insert battery back
Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
Insert cable==== Wait for phone…
Phone found! [ 45 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Checking Structure …
Detected eMMC Flash , Structure detect Ok!
eMMC phone detected! Will use ‘Safe Format’ mode!
UserData : PART_MOUNT failed! Part Damaged! Will use Repair Mode!
Mount : /cache
Size : 0x0000000007300000
State : 0x0001
Prepare Ok! Format Ok!
Don’t touch phone, until it fully bootup to “Welcome Screen”!
